Bed Bug Equipment Rentals Set Up Instructions:

ONE HEATER PACKAGE SET UP:

1. Prepare room by: Covering A/C Vents & Clearing all Heat Sensitive Items from the room.

2. Place EcoForce Eliminator and two fans into the infested room. Note: Make sure there are no obstructions in front of, or behind the heater. 

3. Plug heater cord (Black Cord) and AeroFast 3700 fan cords into the rooms wall outlets

4. Plug the 4 blue extension cords into the heater element ports located on the side of the  heater  

 

one_heater_package

5. Plug blue cords into 4 separate 20 amp breakers

6. Turn all the equipment on. Make sure all the 5 lights on the Eliminator heater are illuminated. 

7. Use Temperature Gun to take temperatures around the room throughout treatment.  

Fluke_62_MAX__62_MAX__Infrared_Thermometers

8. Reach a target range of 120-140 degrees. Keep temperature at target for a minimum of 4 hours.

Note: Keep the air inlet & outlet clear of any obstructions and loose material. Machine will shut itself off as a safety mechanism if blocked. 

ONE HEATER PACKAGE SET UP W/ DISTRIBUTION UNIT: